Cummins ISC issues
03-23-2017, (Subject: Cummins ISC issues ) 
Post: #4
RE: Cummins ISC issues
SPN:3241 FMI: 2 -- i get... >> Aftertreatment Exhaust Gas Temperature 1 - Data Erratic, Intermittent, or Incorrect. The aftertreatment diesel oxidation catalyst inlet temperature sensor is not changing with engine operating conditions.

The engine is saying the temp sensor is stuck in range and not changing temperatures correctly. It is either a bad sensor, or the wiring harness to it is partially shorted out and has moisture in it an d is conductive, or someone has attempted to defeat it with a resistor. -- At least that is what the fault says.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: TDInewguy


Messages In This Thread
Cummins ISC issues - TDInewguy - 03-12-2017,
RE: Cummins ISC issues - Rawze - 03-23-2017
RE: Cummins ISC issues - Rawze - 03-25-2017,
RE: Cummins ISC issues - Rawze - 03-25-2017,
RE: Cummins ISC issues - Rawze - 03-26-2017,
RE: Cummins ISC issues - Rawze - 03-26-2017,
RE: Cummins ISC issues - Unilevers - 04-01-2017,
RE: Cummins ISC issues - Rawze - 04-04-2017,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.