VGT actuator install and calibration non OEM tune

[Brock]

Yes you can.

When you remove the situation and run the first step of the install (actuator must be off) you'll hear the actuator make very loud noises that sound like a old cash registers "cha ching"

If it doesn't make that noise and fails there then your actuators junk. If it passes that step but fails when you screw it back on then it's likely the turbo.

Move the wedge back and forth on the turbo. Does it scrape or hang up at all? Line the hole up with the hole in the wedge when you put actuator back on.

Rawze has actuator st video on checking your turbo.