Crankshaft endplay

[race7820000]

That's one of the first things I did. Got it from cummins also. I mean it's possible I got a bad one but I doubt it.

I've done actuators,injectors,exhaust pressure sensor,and the ones on the intake. The toner wheel or whatever u call it that the crankshaft sensor reads is tight on crank. I've checked the air compressor to make sure it was timed right, i dont know if it makes a difference but the vibration is worse on drivers side. The mirrors and door vibrate bad and the pass side u can barely feel.

Is a 06 isx btw
550 hp
18 sp
370 gear


It runs like it has 300hp . It's terrible. U give it throttle and all it does is radiat vibration through the floor. If u floor it even with a empty Trailer it won't gain speed going up a hill.


Another thing I noticed it when your in the lower gears it has all kinds of power, almost like you could pull a front tire off the ground lol when u get into the high side it's almost like it stops giving the motor fuel. It only does it on the high side.