Volvo headlights

[Billdozer2]

(03-24-2016 )kryten Wrote:  Billdozer - That must be a bitch getting it through an inspection when the "high beams" don't work. I would think the only thing an inspector, road side or shop during annual inspection, would see is a big dark spot in the lower part of the light assembly where light should be and fail it straight away.

You don't remove the high beam assembly. The light looks completely stock from the outside. I still have both a functioning "low beam" and a functioning "high beam". I don't see why it wouldn't pass an inspection. But I haven't had a road side inspection done on this truck yet. I only pass one inspection station and it's rarely open. And if it is open, my company isn't on the "Target List". So they just wave me right through.