Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / CM 2250 EGR Valve question, please help...

new reply
CM 2250 EGR Valve question, please help...
04-05-2017, (Subject: CM 2250 EGR Valve question, please help... ) 
Post: #19
Nilao Offline
HMR-Contrinbuting V.I.P.  (1316 Likes)  *****

 		Posts: 1,527
Joined: Sep 2015
Thanks: 62
Given 1316 thank(s) in 746 post(s)
RE: CM 2250 EGR Valve question, please help...
It's possible the additional oil consumption will return to normal after the engine breaks in to its new operating conditions. I know mine after mm had an increase followed by a return to normal after about 40k miles. Shortly after that though I had #5 liner drop and take out the head gasket.
Return to Top | find
replyreply
 Thanks given by: Squish099 , JMBT
new reply


Messages In This Thread
RE: CM 2250 EGR Valve question, please help... - Nilao - 04-05-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication