Front cover oil leak, specialty tools needed? qsx15
02-21-2016, (Subject: Front cover oil leak, specialty tools needed? qsx15 ) 
Post: #8
RE: Front cover oil leak, specialty tools needed? qsx15
crank pin, cam gear puller, wedges, front seal installer, and the hockey stick for setting the jakes (because i would run another overhead myself)

Honestly its not hard, but if it were just close to rubbing through or had a small hole i would jb weld the thing and rock on. There is very little to no pressure in the cover so all it has to hold back is splash oil.
replyreply


Messages In This Thread
RE: Front cover oil leak, specialty tools needed? qsx15 - Unilevers - 02-21-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.