Oil pan debris |
04-14-2017, (Subject: Oil pan debris ) Post: #9 | |||
| |||
RE: Oil pan debris (04-14-2017 )Nilao Wrote: The brown pieces are definitely part of the piston cooling jet. I'd replace them all if one has started to fall apart. If you lose a jet you will lose the piston in short order. The metal almost looks like a gear tooth. Hard to tell. Almost looks like a piece of the rings also. Where on the cooling nozzle does the plastic come from? As far as I can see they are a bent metal tube that are connected to the oil passages on the block with a banjo bolt. CM871 | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Oil pan debris - 386lover - 04-14-2017, RE: Oil pan debris - snailexpress - 04-14-2017, RE: Oil pan debris - Nilao - 04-14-2017, RE: Oil pan debris - 386lover - 04-14-2017 RE: Oil pan debris - Hammerhead - 04-14-2017, RE: Oil pan debris - Rawze - 04-14-2017, RE: Oil pan debris - 386lover - 04-14-2017, RE: Oil pan debris - Mr Hagg - 04-14-2017, RE: Oil pan debris - 386lover - 04-14-2017, RE: Oil pan debris - Hammerhead - 04-14-2017, RE: Oil pan debris - Mr Hagg - 04-17-2017, RE: Oil pan debris - Hammerhead - 04-14-2017, RE: Oil pan debris - 386lover - 04-14-2017, RE: Oil pan debris - Vin - 04-17-2017, RE: Oil pan debris - 386lover - 04-18-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.