2250 Carnage Pictures

[Hammerhead]

(04-15-2017 )Unilevers Wrote:  i have the spec here somewhere. its 80ftlbs plus 60ish degrees i think but i will have to verify.

the kit with the plungers, tappets, and barrels fits both the 3 and 2 cyl pump. i dont know why cummins has such a hard time with this!! I still see 3 cyl pumps fail with updated parts though, so fair warning on that.

If the ceramic plungers are changed, then what is the next failure on the three cyl pump?
Thanks for the torque info, when you locate it I'd appreciate if you would email the procedure to me. CWC Edmonton couldn't provide one, go figure.