ECM replacement advice |
04-24-2017, (Subject: ECM replacement advice ) Post: #7 | |||
| |||
RE: ECM replacement advice (04-23-2017 )arch_stanton Wrote: Mid west ECM for 1200$ has been around awhile and is the most expensive they get cheaper from there down to about 400$ any recommendations or places to avoid I have an ecm from an 01' M-11 sitting on the shelf you can have for the shipping costs if you wanna give it a try. I had a 96' N-14 that I did this to and it ran good enough to get to the dealer and have the correct programming flashed to it. Of course if you don't mind a "lopey" idle and touchy accelerator just swap and run it ;-) | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
ECM replacement advice - arch_stanton - 04-23-2017, RE: ECM replacement advice - Waterloo - 04-23-2017, RE: ECM replacement advice - dbl overdrive - 04-23-2017, RE: ECM replacement advice - arch_stanton - 04-23-2017, RE: ECM replacement advice - Waterloo - 04-23-2017, RE: ECM replacement advice - arch_stanton - 04-23-2017, RE: ECM replacement advice - Waterloo - 04-26-2017, RE: ECM replacement advice - schISM - 04-24-2017 RE: ECM replacement advice - arch_stanton - 04-24-2017, RE: ECM replacement advice - schISM - 04-25-2017, RE: ECM replacement advice - schISM - 04-26-2017, RE: ECM replacement advice - arch_stanton - 04-29-2017, RE: ECM replacement advice - arch_stanton - 06-07-2017, RE: ECM replacement advice - zyNoT - 06-08-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.