cm2350 Gear Fuel pump pressure

[snailexpress]

(04-30-2017 )mmssvv Wrote:  

(04-30-2017 )Starlight Wrote:  If you only have 145 psi in a 2350 you aint going anywhere. Idling you should see well over 5000 psi and pulling under full load well over 30000. Your engine needs about 3000 just to start.

I am asking for the gear pump pressure measured at the fuel filter ports, not for XPI pump.Thanks anyway for the replay!

Aftertreatment fuel injector pressure during regeneration is close to gear pump pressure.