Hard shift high to low range
05-09-2017, (Subject: Hard shift high to low range ) 
Post: #9
RE: Hard shift high to low range
Range select cylinder might be dragging or leaking air past the o-rings causing a delay in moving. Rear o-ring is easy, front one more involved, check the repair manual on Eaton's site.
replyreply
 Thanks given by: Mrkentee , Rawze


Messages In This Thread
RE: Hard shift high to low range - kmk - 05-09-2017
RE: Hard shift high to low range - Unilevers - 05-25-2017,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.