Hard shift high to low range

[Mrkentee]

(05-10-2017 )Mr Hagg Wrote:  Ok sound like its just a air issue then. It is easy to do. Remove the 4 bolts and knock off back cover you will see the piston and it will have a big nut in the center. At this point you should be able to know it something is wrong..If you are in ga bring it by and i can walk you through how to do it.. Im sure some of the other guys here could too...

I got the kit. If I was in Georgia, I would stop by.
I was thinking about doing it tomorrow afternoon if I got some free time. But maybe this should wait until I'm in my driveway, so I'm not pushed for time, etc.
I hope it's obvious when I look in there.