uploaded some new Videos

[Rawze]

(03-25-2016 )kryten Wrote:  Rawze - You forgot 1 thing and forgot to mention another. You never showed reinstalling the bearing spacer, not even sure if it's required, and you never mentioned hub end play. If I remember right you showed how to check end play in your brake reline video.

Thanks..

I left the spacer out on purpose. i was told that the new bearings did not require it.


I did not do end play, as I torqued it to 50 ft-lbs pre-load. Like you say as well, it is in the brake video if someone wants to check it.

Hub nut torque for bearings without spacers = 50-ft lbs. Bearings WITH spacers = 230 ft-lbs.

I would think that with spacers, you would want to check hub end play just to be sure, but with no spacers, there will be no end play at 50-ft-lbs.