CM871 400HP Dyno sheet |
06-03-2017, (Subject: CM871 400HP Dyno sheet ) Post: #9 | |||
| |||
RE: CM871 400HP Dyno sheet (06-03-2017 )Rawze Wrote: I hear that story over and over and over and over --- IT NEVER WORKS OUT!!!!! I'll add one thing to the "fixer-up-truck" or "limp-it-til-I-can-afford-to-fix-it-truck", if YOU are not mechanically inclined enough or don't have the tools, you are in NO POSITION to purchase said type of truck. Labor rates, parts costs, and the complexity of the electronic controls systems on these modern engines makes truck ownership considerably more difficult today than it used to be even 10yrs ago. The longevity is just not there anymore unless you know how to properly prepare and maintain one yourself. I have owned trucks for over 20yrs, and I will honestly tell you it was far less stressful when I bought my first (5)y/o used truck with ~550k miles on it than the one that I currently own. Doesn't sound like much, but consider this; this truck is PAID FOR, I have owned it since new, and I have an emergency fund that can REPLACE the truck, not rebuild it I mean pay cash for another similar unit. The reliability issues I had before I found this site and properly "fixed" my truck still have my spidey-senses tingling fear every single day. I actually recommend against most people becoming an Owner/Operator anymore. Between increasing EPA restrictions, modern HOS lack of flexibility, ever increasing regulations and enforcement, and drivers now actually being charged criminally for accidents if someone can be found negligent. I am honestly of the opinion that the risk is no longer worth the reward, unless you are very financially responsible, and have a solid financial foundation so you don't have the financial pressure to take the risks we all used to take years ago. Think about this; with e-log implementation, think about the reduced revenue from a virtual elimination of HOS fines, do you really think the DOT is just going to close up shop and lay off all those union secure jobs? Really? Or perhaps they now will have a different mandate to continue generating those fine revenues by finding something else to concentrate on? How much more strict do you think they are going to inspect and enforce defects on our vehicles? You are asking to become the owner of said vehicle...that means YOU will have to become even MORE vigilant about your truck...that will not happen without added expense. Still want a target, I mean "fixer-upper"? I just unloaded at the Port of Baltimore. There was a reload there, but the rate was just too cheap to make any money on it running legally. I kid you not, 15yrs ago I'd have loaded it without a seconds hesitation, lied on my permit application and snuck out at night without pilot cars and such and I'd have made money on it. Nowadays? No F##ing way! Get into an accident like that, 15yrs ago, a fine and carry on, today, bracelets and go to jail! No $h!t, I was leaning against the very S/N unit I was offered while they were lifting my load off, I drove away empty. If you cannot afford to think and operate with this mentality, you have no business owning a truck. Harsh truth, but it's a fact. User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..." | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
CM871 400HP Dyno sheet - Vjex - 06-01-2017, RE: CM871 400HP Dyno sheet - Vjex - 06-01-2017, RE: CM871 400HP Dyno sheet - Waterloo - 06-01-2017, RE: CM871 400HP Dyno sheet - Vjex - 06-02-2017, RE: CM871 400HP Dyno sheet - Rawze - 06-02-2017, RE: CM871 400HP Dyno sheet - Vjex - 06-02-2017, RE: CM871 400HP Dyno sheet - Rawze - 06-03-2017, RE: CM871 400HP Dyno sheet - Hammerhead - 06-03-2017 RE: CM871 400HP Dyno sheet - Vjex - 06-04-2017, RE: CM871 400HP Dyno sheet - Brock - 06-03-2017, RE: CM871 400HP Dyno sheet - smorgan87 - 06-03-2017, RE: CM871 400HP Dyno sheet - Vjex - 06-04-2017, RE: CM871 400HP Dyno sheet - Hammerhead - 06-04-2017, RE: CM871 400HP Dyno sheet - Vjex - 06-04-2017, RE: CM871 400HP Dyno sheet - Hammerhead - 06-04-2017, RE: CM871 400HP Dyno sheet - Vjex - 06-05-2017, RE: CM871 400HP Dyno sheet - Hammerhead - 06-05-2017, RE: CM871 400HP Dyno sheet - Waterloo - 06-05-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.