CM871 400HP Dyno sheet |
06-04-2017, (Subject: CM871 400HP Dyno sheet ) Post: #11 | |||
| |||
RE: CM871 400HP Dyno sheet (06-03-2017 )Rawze Wrote:(06-02-2017 )Vjex Wrote: ... Well, I see what you saying.... I shouldn't have wrote my plan, but my situation is not as bad as it seems. I've been an o/o for a while now, buying another truck for cash, will finance overhaul if needed. All I'm asking is if blowby could be a bit reduced , or in your book 15" of blowby is automatic no-go! Truck had egr cooler, turbo and clutch replaced, dyno shows that most of the horses are still there. Thanks | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
CM871 400HP Dyno sheet - Vjex - 06-01-2017, RE: CM871 400HP Dyno sheet - Vjex - 06-01-2017, RE: CM871 400HP Dyno sheet - Waterloo - 06-01-2017, RE: CM871 400HP Dyno sheet - Vjex - 06-02-2017, RE: CM871 400HP Dyno sheet - Rawze - 06-02-2017, RE: CM871 400HP Dyno sheet - Vjex - 06-02-2017, RE: CM871 400HP Dyno sheet - Rawze - 06-03-2017, RE: CM871 400HP Dyno sheet - Hammerhead - 06-03-2017, RE: CM871 400HP Dyno sheet - Vjex - 06-04-2017 RE: CM871 400HP Dyno sheet - Brock - 06-03-2017, RE: CM871 400HP Dyno sheet - smorgan87 - 06-03-2017, RE: CM871 400HP Dyno sheet - Vjex - 06-04-2017, RE: CM871 400HP Dyno sheet - Hammerhead - 06-04-2017, RE: CM871 400HP Dyno sheet - Vjex - 06-04-2017, RE: CM871 400HP Dyno sheet - Hammerhead - 06-04-2017, RE: CM871 400HP Dyno sheet - Vjex - 06-05-2017, RE: CM871 400HP Dyno sheet - Hammerhead - 06-05-2017, RE: CM871 400HP Dyno sheet - Waterloo - 06-05-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.