Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Rawze's Technical Documents / Fixing your EGR/DPF Problems...

new reply
Fixing your EGR/DPF Problems...
06-07-2017, (Subject: Fixing your EGR/DPF Problems... ) 
Post: #12
a2logistics Offline
Established  (0 Likes)  **

 		Posts: 4
Joined: Dec 2016
Thanks: 0
Given 0 thank(s) in 0 post(s)
RE: Fixing your EGR/DPF Problems...
Can you Please Help on this issue
What if i have a Big Crack in the DPF Filter. It looks like its Burned out . Its about 3 Inches wide.. I was getting error code for DPF so my Mechanic took apart and it has a hole at the corner. and i am also getting low fuel avg on this truck. like 4 MPG. Should i simply replace the filter or should i check something else as well before replacing it.
I'm just curious why did it crack and it more looks like its burned. So could there be a Fuel leak or something.. its Prostar Cummins ISX
Please Advise
Thank you
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Fixing your EGR/DPF Problems... - a2logistics - 06-07-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication