Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / Possible lift pump problem???

new reply
Possible lift pump problem???
06-13-2017, (Subject: Possible lift pump problem??? ) 
Post: #18
Hammerhead Offline
Kookoo for Cocoa Puffs  (1922 Likes)  *****

 		Posts: 1,400
Joined: May 2016
Thanks: 1014
Given 1922 thank(s) in 741 post(s)
RE: Possible lift pump problem???
No it should not be continuous.
It has a "timer" for the lift pump. Its purpose is to remove any potential air from the system, as air is very bad in injectors. After one minute or so, the system should be cleared of any air and no longer require the assistance from the lift pump, which is why the ECM then stops power supply.

User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..."
Return to Top | find
replyreply
 Thanks given by: Waterloo , hhow55
new reply


Messages In This Thread
RE: Possible lift pump problem??? - Hammerhead - 06-13-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication