@m*m^2 idling less than 1 gallon per hour
07-03-2017, (Subject: @m*m^2 idling less than 1 gallon per hour ) 
Post: #3
RE: @m*m^2 idling less than 1 gallon per hour
I'll be putting a new apu in my truck later this year. Im not doing it so much for the fuel savings but to cut my use and wear on the truck engine.

I will, however, still idle the truck if it's forcast under 15 deg F though. Even though you can get an Arctic apu... Which is really the same thing as a closed loop apu except it's plumbed into the engine coolant, which is what my truck currently has...I haven't really learned to trust it to keep my fuel from gelling. I worry about the fuel in the lines and the fuel filters, not so much what is in the tanks and engine.


User's Signature: 2010 T2000, CM871, 13spd, 977k, tanker yanker
Overhauled @ 927k
replyreply


Messages In This Thread
RE: @m*m^2 idling less than 1 gallon per hour - dhirocz - 07-03-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.