Multiplex gauges |
07-03-2017, (Subject: Multiplex gauges ) Post: #4 | |||
| |||
RE: Multiplex gauges Yes it does actually! I'm not going to be using factory boost but I do want to keep an eye on oil temp and my drives especially. I'll take a look when it's light out tomorrow and see if I can find the plug. Then it should be a matter of ordering the temp sensors and jumper harness to those sensors. So I'm assuming since inline 5 doesn't work that inline 6 won't either? Where did you get ESA? I don't necessarily need the accuracy of an aftermarket gauge for these. That's why I went aftermarket of boost and pyro. The rest of these I'd rather keep somewhat matching and it keeps me from having random wires running about. As far as the parts go...I'm usually pretty thrifty on finding them for a good deal. The axle temp gauges, for example, I just want them to give me an indicator if something is wrong (like high temp due to low fluid)while I'm driving. User's Signature: 2010 T2000, CM871, 13spd, 977k, tanker yanker Overhauled @ 927k | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Multiplex gauges - dhirocz - 07-03-2017, RE: Multiplex gauges - Nilao - 07-03-2017, RE: Multiplex gauges - Mrkentee - 07-03-2017, RE: Multiplex gauges - dhirocz - 07-03-2017 RE: Multiplex gauges - Mrkentee - 07-03-2017, RE: Multiplex gauges - kryten - 07-03-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.