Doing overhead today, CM-871
07-04-2017, (Subject: Doing overhead today, CM-871 ) 
Post: #8
RE: Doing overhead today, CM-871
(07-04-2017 )smorgan87 Wrote:  SchlSM, Did it sit for an extended period at some point?
WATERLOO, if you're smoking at startup id recommend checking out them injectors if you havent already. Ur idle smooth? I found one of mine was jacked up and leaking like a faucet after doing mm and pulling the boost out at idle. Went from 6.5-7mpg empty to 10. De-mandates really expose what condition the engine is really in.

I don't recall him saying anything about doing injectors, but Waterloo has done a recent (since he mm'd his ECM) executive class inframe on his truck. I'm pretty sure it's in above average condition judging by his knowledge base and the work he has talked about doing on this site.


User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..."
replyreply


Messages In This Thread
RE: Doing overhead today, CM-871 - Hammerhead - 07-04-2017
RE: Doing overhead today, CM-871 - Unilevers - 07-04-2017,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.