Crankcase pressure

[Mrkentee]

(07-05-2017 )Unilevers Wrote:  

(07-05-2017 )Mrkentee Wrote:  Is the crankcase pressure sensor disabled with @m*m^2?
I have zero pressure and zero voltage in Insite, and no check engine light ir code.
I have voltage at the plug. Perhaps the sensor is bad???

its disabled and all the logic removed. put the hole in the filter from the pic floating around here.

Thank you. I had done that, but thought maybe it was getting too soaked with oil. So I bought a new one and did the same thing. I just wanted to see if there was a difference in
pressure. I have gases coming out my oil filler tube. I wanted to blame it on the filter. I need to get it dyno'd and checked properly.