Crankcase pressure
07-06-2017, (Subject: Crankcase pressure ) 
Post: #5
RE: Crankcase pressure
(07-05-2017 )Unilevers Wrote:  
(07-05-2017 )Mrkentee Wrote:  Is the crankcase pressure sensor disabled with @m*m^2?
I have zero pressure and zero voltage in Insite, and no check engine light ir code.
I have voltage at the plug. Perhaps the sensor is bad???

its disabled and all the logic removed. put the hole in the filter from the pic floating around here.

Curious, is the hole needed even with the new 'maintenance free' breather filter element?


User's Signature: 2010 T2000, CM871, 13spd, 977k, tanker yanker
Overhauled @ 927k
replyreply


Messages In This Thread
Crankcase pressure - Mrkentee - 07-05-2017,
RE: Crankcase pressure - Unilevers - 07-05-2017,
RE: Crankcase pressure - dhirocz - 07-06-2017
RE: Crankcase pressure - Rawze - 07-06-2017,
RE: Crankcase pressure - Rawze - 07-06-2017,
RE: Crankcase pressure - Rawze - 07-06-2017,
RE: Crankcase pressure - Rawze - 07-07-2017,
RE: Crankcase pressure - Nilao - 07-07-2017,
RE: Crankcase pressure - Rawze - 07-07-2017,
RE: Crankcase pressure - Nilao - 07-07-2017,
RE: Crankcase pressure - Unilevers - 07-07-2017,
RE: Crankcase pressure - Nilao - 07-07-2017,
RE: Crankcase pressure - Rawze - 07-08-2017,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.