Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / ECM swapping

new reply
ECM swapping
07-07-2017, (Subject: ECM swapping ) 
Post: #2
Nilao Offline
HMR-Contrinbuting V.I.P.  (1316 Likes)  *****

 		Posts: 1,527
Joined: Sep 2015
Thanks: 62
Given 1316 thank(s) in 746 post(s)
RE: ECM swapping
I would think so long as they are the same model engine and same rated HP from factory it should be fine. The abs might get flaky as I think some are programmed with the vin in them and they compare it to the engine computer vin. I'm not 100% sure though. Shops don't keep ecm's around for every HP of engine as a test ecm. They usually just have 1 for each engine model.
Return to Top | find
replyreply
new reply


Messages In This Thread
ECM swapping - ZeroNthedark - 07-07-2017,
RE: ECM swapping - Nilao - 07-07-2017
RE: ECM swapping - Squish099 - 07-07-2017,
RE: ECM swapping - Squish099 - 07-07-2017,
RE: ECM swapping - Rawze - 07-08-2017,
RE: ECM swapping - Magard - 07-08-2017,
RE: ECM swapping - Rawze - 07-08-2017,
RE: ECM swapping - Rawze - 07-15-2017,
RE: ECM swapping - Magard - 07-15-2017,
RE: ECM swapping - Rawze - 07-16-2017,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication