Leveling valve/rod

[Rawze]

(07-12-2017 )Tcarpenter Wrote:  Any one have any ideas how to fix the rod from coming out the rubber boots on the axle?

Assuming you are referring to the small rod for the leveling valve??? -- You were not very specific.



http://www.homedepot.com/p/Loctite-10-fl.../300198848

======

I hung my load-bar holders to the back of my cab with this stuff. Holds like mad but still slightly flexible. - I have since used it for other applications that need a glue with a slight flexibility to it.

Just be sure to use some brake cleaner on the components so that there is no oil residue or wax on them.

You need to also take a look at your leveling valve to make sure it is not hanging up and pulling it apart too.