Finding shorts with this?

[Waterloo]

(07-13-2017 )Kid Rock Wrote:  Just curious, What type of diagnostic did you have them run?

I had them run the International Cab Controller program, Diamond Logic. I don't know what Pete uses, but it will read the codes off of the cab controller and should direct you exactly to, or real close to the problem. In my case, it read "Faulty Compass Control Module". I didn't even know that I had a compass on this thing, as it never worked from the day I bought the truck used. Which at that point had been a couple of years. I had the mechanic show me where the module was, he didn't know either, but we eventually found it in the dash above the main fuse block. Two screws and a plug, and problem fixed with new eBay Compass Module.

Oh, and it did not tell us that was the issue, but like I said, I went home and brought up the schematics and figured it out real quick that the compass module was the problem. So, it is not as cut and dry, you still may have to look at some wiring diagrams to nail it down.