Help please. ? |
03-28-2016, (Subject: Help please. ? ) Post: #16 | |||
| |||
RE: Help please. ? Start it and unplug the magic plug see how hot the venture pipe gets going into the intake if it's getting hot then the egr is stuck open.If it stays normal temp then egr is closing like it should. This is just a way to test if egr is closing the way it should with temp sensor unplugged.Also with it unplugged boost pressure will only reach about 30 to 32 psi under high load engine conditions. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Help please. ? - the missing link - 03-27-2016, RE: Help please. ? - the missing link - 03-27-2016, RE: Help please. ? - Waterloo - 03-27-2016, RE: Help please. ? - Waterloo - 03-27-2016, RE: Help please. ? - the missing link - 03-27-2016, RE: Help please. ? - Hedley - 03-27-2016, RE: Help please. ? - hhow55 - 03-27-2016, RE: Help please. ? - Hedley - 03-28-2016, RE: Help please. ? - hhow55 - 03-27-2016, RE: Help please. ? - Waterloo - 03-27-2016, RE: Help please. ? - Rawze - 03-27-2016, RE: Help please. ? - the missing link - 03-27-2016, RE: Help please. ? - the missing link - 03-27-2016, RE: Help please. ? - hhow55 - 03-27-2016, RE: Help please. ? - the missing link - 03-27-2016, RE: Help please. ? - Rawze - 03-27-2016, RE: Help please. ? - gearhead - 03-28-2016 RE: Help please. ? - the missing link - 03-28-2016, RE: Help please. ? - in2trux - 03-29-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.