ECM swapping
07-16-2017, (Subject: ECM swapping ) 
Post: #14
RE: ECM swapping
(07-15-2017 )Magard Wrote:  Cam sensor. Will shut off like its ignition switch problems. Thanks

Usually you will get a lot of alarms for cam/crank position sensor failures along with the shutdown if they are failing. I didn't see where he mentioned he was getting any alarms, just truck shutting off. Nonetheless, it is always a good idea to check the ecm for fault codes whenever it shuts down.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply


Messages In This Thread
ECM swapping - ZeroNthedark - 07-07-2017,
RE: ECM swapping - Nilao - 07-07-2017,
RE: ECM swapping - Squish099 - 07-07-2017,
RE: ECM swapping - Squish099 - 07-07-2017,
RE: ECM swapping - Rawze - 07-08-2017,
RE: ECM swapping - Magard - 07-08-2017,
RE: ECM swapping - Rawze - 07-08-2017,
RE: ECM swapping - Rawze - 07-15-2017,
RE: ECM swapping - Magard - 07-15-2017,
RE: ECM swapping - Rawze - 07-16-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.