Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / CM2250 Will Not Regen

new reply
CM2250 Will Not Regen
07-19-2017, (Subject: CM2250 Will Not Regen ) 
Post: #3
Jolt Offline
Established  (1 Likes)  **

 		Posts: 7
Joined: Jul 2017
Thanks: 10
Given 1 thank(s) in 1 post(s)
RE: CM2250 Will Not Regen
(07-19-2017 )joed2323 Wrote:  Have you removed the IMAP sensor and or checked to see if it was plugged, if so the egr system needs to be throughly cleaned, it should be cleaned regardless at this point.

When was the aftertreatment fuel injector serviced/replaced last? I would definitely replace this

I bought an IMAP sensor yesterday and will put it on today. When you say the egr system needs to be cleaned what do you mean exactly? I just bought a brand new egr and I had it put on. I just bought the truck in October of 2016 and I haven't serviced or cleaned the aftertreatment fuel injector.
Return to Top | find
replyreply
new reply


Messages In This Thread
CM2250 Will Not Regen - Jolt - 07-19-2017,
RE: CM2250 Will Not Regen - Jolt - 07-19-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication