CM 2250 issues

[Fergie]

(07-29-2017 )Waterloo Wrote:  

(07-29-2017 )Fergie Wrote:  

(07-29-2017 )Waterloo Wrote:  Fergie, look up Magard on this site. I believe he has the same truck you have, motor, Pete... He rid himself of his mandate himself, with some help from Unilever I believe. There is some welding involved with the SCR system, if I am not mistaken. But, you will need an Inline reader with Insite. Get one on eBay, that is where I got mine. And yes, I rid myself of my mandate in my driveway with a MacBook Pro and a bit of help from Unilever. I have the CM-871, which was very easy to do. Yours, takes a bit of work, but is doable if you can weld, or have a buddy that can.

Also, the FUEL PUMP! You do know about THAT? If not, speak up, you think you have problems with your wife now... If that fuel pump goes... Boat Anchor.

Yes I've read about that fuel pump the other night, probably check that out tomorrow.

Hit the refresh on my post and see if you missed anything, I am a notorious editor!

Thanks, that's one of them I was contemplating.