9400 Eletrical problem

[Rawze]

My reply to his problems...
http://rawze.com/forums/showthread.php?t...2#pid16882

Did you read the part where I said ...

Rawze Wrote:...
replace ALL of the tiny little red fuses in the far left of the fuse panel. They don't go bad but the blades all tarnish after a year or 2 and create just those types of issues. I think mine were 5-amp each, and I replaed them all with 10-amp fuses.
...

If the 9400 is anything like the pro-star, it could simply be tarnished fuses in the fuse panel.

Also check all the grounds going to the block and starter. Internationals are bad about corrosion and poor connections there.