| line boring mains |
| 08-15-2017, (Subject: line boring mains ) Post: #5 | |||
| |||
| RE: line boring mains Some machine shops used to Weld the bearing surface in the block then cut mill the cap and then reline hone it so that it stays in same location. I don't know if you can find anyone who still does that. I also don't know how well cummins blocks will handle the heat that Welding will introduce into the main web. But the Weld will be harder then the block is.. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
line boring mains - jn0878 - 08-14-2017, RE: line boring mains - Signature620 - 08-15-2017, RE: line boring mains - Rawze - 08-15-2017, RE: line boring mains - jn0878 - 08-15-2017, RE: line boring mains - Unilevers - 08-15-2017, RE: line boring mains - jn0878 - 08-15-2017, RE: line boring mains - Squish099 - 08-15-2017 RE: line boring mains - Rawze - 08-15-2017, RE: line boring mains - Hammerhead - 08-15-2017, RE: line boring mains - dhirocz - 08-15-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.