Horton fan clutch quality

[Rounded_nut]

Well checked the hose over and no obstructions, a gentle breath made it through. After looking at it again though the clutch material is toasted as I can spin the fan by hand with no almost no resistance compared to disengaged. At this point I'd say the solenoid is functioning properly but for the price and peace of mind it's being replaced and I'll be gaining a spare. I'll have to call the stealer tomorrow and see if they'll warranty it, but most likely I'll be replacing the hub for the borg warner.

The seal kit could be done in the parking lot, but boy are those of rings small and easy to lose on a bench!