Egr cooler question |
03-31-2016, (Subject: Egr cooler question ) Post: #12 | |||
| |||
RE: Egr cooler question If you are serious about buying, which i do not recommend. I would before buying, pop the valve cover, and look for damage on the cam lobes. Soot is the enemy, and it will accelerate the wear in these motor's. Waterloo write up is very true, and the abuse is horrible for these truck's. Personally, i would avoid these truck's at all cost. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Egr cooler question - Paracefan - 03-30-2016, RE: Egr cooler question - Waterloo - 03-30-2016, RE: Egr cooler question - Rawze - 03-30-2016, RE: Egr cooler question - Paracefan - 03-30-2016, RE: Egr cooler question - redbeard - 03-30-2016, RE: Egr cooler question - hhow55 - 03-30-2016, RE: Egr cooler question - Paracefan - 03-30-2016, RE: Egr cooler question - Rawze - 03-30-2016, RE: Egr cooler question - Marajin - 03-30-2016, RE: Egr cooler question - redbeard - 03-30-2016, RE: Egr cooler question - Waterloo - 03-31-2016, RE: Egr cooler question - hhow55 - 03-31-2016 RE: Egr cooler question - Waterloo - 03-31-2016, RE: Egr cooler question - Paracefan - 03-31-2016, RE: Egr cooler question - Rawze - 03-31-2016, RE: Egr cooler question - kryten - 03-31-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.