Lot of blowby after rebuild |
08-31-2017, (Subject: Lot of blowby after rebuild ) Post: #5 | |||
| |||
RE: Lot of blowby after rebuild You say it was mandated, Do you mean deleted?, if so this is your underlying problem. When you replaced the turbo, was it properly calibrated, along with the turbo actuator?. You can read up on how to do this and many other procedure's on quickserve.cummins.com User's Signature: It's hard to win an argument with a smart person, but it's damn near impossible to win an argument with a stupid person | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Lot of blowby after rebuild - cubillos389 - 08-31-2017, RE: Lot of blowby after rebuild - tlzimmerman - 08-31-2017, RE: Lot of blowby after rebuild - cubillos389 - 08-31-2017, RE: Lot of blowby after rebuild - Nilao - 08-31-2017, RE: Lot of blowby after rebuild - hhow55 - 08-31-2017 RE: Lot of blowby after rebuild - Rawze - 08-31-2017, RE: Lot of blowby after rebuild - cubillos389 - 08-31-2017, RE: Lot of blowby after rebuild - hhow55 - 09-01-2017, RE: Lot of blowby after rebuild - cubillos389 - 09-01-2017, RE: Lot of blowby after rebuild - Rawze - 09-01-2017, RE: Lot of blowby after rebuild - cubillos389 - 09-03-2017, RE: Lot of blowby after rebuild - Aussie Steve - 09-01-2017, RE: Lot of blowby after rebuild - preacherboy24 - 09-01-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.