Cm871 codes 2961 2764 4214

[JetHauling]

last night i changed the back pressure sensor and clean the imap (wasn't bad at all)
This morning i had a 15 miles drive to get loaded and it still ran like crap and derated. i shut the truck off for a few hours until i got loaded. As soon as i had a load on it she ran great. I didn't have any check engine lights flashing, and only had the turbo cough happen to me once as i was pulling out of the fuel stop back out on the highway. As soon as i dumped that load and headed to my second pick up it ran like crap again. When i got loaded a second time it went back to running perfect again...
when i got back to my yard tonight i cleaned the 2 delta-p pipes and cleaned the temp sensor...
Now today when it was empty and running bad it acted diffrent then yesterday would boost but it was acting delayed it wouldn't get up to full boost until i was high rpms(16-1700) and when i lay off the throttle the boost drops to under 10psi

Also as i said yesterday, if i disable the auto REGEN it runs fine again...
Any ideas? i don't have access to the cummins software until the weekend to check the atmosphere pressure and clear/check the faults