CM 871 Injector Issue

new reply

Threaded Mode | Linear Mode

CM 871 Injector Issue

09-10-2017, (Subject: CM 871 Injector Issue )

Post: #6

snailexpress Offline

HMR-Contrinbuting V.I.P. (904 Likes)

Posts: 1,081
Joined: Feb 2016

Thanks: 1475
Given 904 thank(s) in 515 post(s)

RE: CM 871 Injector Issue

I had same problem with 871. Mechanic took out injector and pressurized cylinder with air using injector size rubber tip on blow gun. Valves should be in close position. It was well noticeable air leak on intake side from the valve.
Lost pictures but it was posted on old forum.

Return to Top | find

reply reply

Thanks given by:

Hammerhead , trucklogger2 , Rawze , Waterloo

« Next Oldest | Next Newest »

new reply

Messages In This Thread

CM 871 Injector Issue - graysonlogistics - 09-09-2017,

RE: CM 871 Injector Issue - Hammerhead - 09-09-2017,

RE: CM 871 Injector Issue - Rawze - 09-09-2017,

RE: CM 871 Injector Issue - graysonlogistics - 09-09-2017,

RE: CM 871 Injector Issue - Hammerhead - 09-10-2017,

RE: CM 871 Injector Issue - snailexpress - 09-10-2017

RE: CM 871 Injector Issue - graysonlogistics - 09-10-2017,

RE: CM 871 Injector Issue - Hammerhead - 09-10-2017,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.