Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Rawze's Technical Documents / CM871 Engine cycle...

new reply
CM871 Engine cycle...
09-13-2017, (Subject: CM871 Engine cycle... ) 
Post: #24
hepy Offline
Established  (0 Likes)  **

 		Posts: 7
Joined: Jul 2017
Thanks: 2
Given 0 thank(s) in 0 post(s)
RE: CM871 Engine cycle...
(03-18-2016 )Hedley Wrote:  I don't have CM2250s but I did set my CM871s to 30 lbs boost and they purr like kittens, I would also recommend that you back off the boost a bit as well.


Hay is that cm871 a isx400st if so are you saying the 30psi is a good set for that engine because mines is set 22 psi 23 somewhere around there and I want to take it up some
Return to Top | find
replyreply
new reply


Messages In This Thread
CM871 Engine cycle... - Rawze - 03-15-2016,
RE: CM871 Engine cycle... - hepy - 09-13-2017
RE: CM871 Engine cycle... - Unilevers - 03-18-2016,
RE: CM871 Engine cycle... - Unilevers - 12-23-2016,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication