Upgrading trans heat exchanger to an oil cooler
10-03-2017, (Subject: Upgrading trans heat exchanger to an oil cooler ) 
Post: #25
RE: Upgrading trans heat exchanger to an oil cooler
Warning- if you own a 386 and want to install an air transmission cooler, the k1956 kit has the 18025 oil cooler. It is shorter than stock and has 3 rows, which makes it wider (up and down). My friends 379 with oem cooler is longer, but only has 2 rows.
The two row cooler will be a lot easier to install in the room you have in front under the condenser.
replyreply
 Thanks given by: Rawze , Roysbigtoys


Messages In This Thread
RE: Upgrading trans heat exchanger to an oil cooler - Mrkentee - 10-03-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.