Acceleration, or not so much...

[BobLabla]

(10-03-2017 )Rawze Wrote:  Start with an injector leak test, then follow up with cylinder cut-out tests after it is acting up./

I've already done the cutout test per your video Rawze. It ran at idle on all cylinders one at a time with the rest shut off, just wish I could see all the cylinders individually and their performance while on as well as cut out. I will get the leak down tool from my shop and try that out. What else could possibly cause me to lose too end rpm intermittently?! I'm thinking since I have put a turbo on it and swapped computers, axed the mandate, ran overhead and inspected everything.... Really only left with fueling being the issue?.?.? Just wish there was some way to bench test the injectors to check performance and rule that out instead of taking that monetary leap. That's a big leap....