Stemco wheel seals
10-04-2017, (Subject: Stemco wheel seals ) 
Post: #7
RE: Stemco wheel seals
So those seals last awhile taken care of...good.

I an going axle by axle and fixing all the dumb stuff that gets missed or half assed by half a lifetime worth of company driver-ness. With the availability of the SKF, it sounds like that's the way to go. All 3 axles are getting new wheel bearings and pro torque nuts as well so I can dial the end play in better and to increase seal life and lessen drag. Just wanted to make sure I wasn't leaving something on the table with the seals.


User's Signature: 2010 T2000, CM871, 13spd, 977k, tanker yanker
Overhauled @ 927k
replyreply


Messages In This Thread
Stemco wheel seals - dhirocz - 10-03-2017,
RE: Stemco wheel seals - Nilao - 10-03-2017,
RE: Stemco wheel seals - Rawze - 10-03-2017,
RE: Stemco wheel seals - JMBT - 10-04-2017,
RE: Stemco wheel seals - dhirocz - 10-04-2017
RE: Stemco wheel seals - JMBT - 10-06-2017,
RE: Stemco wheel seals - Rawze - 10-07-2017,
RE: Stemco wheel seals - Rawze - 10-16-2020,
RE: Stemco wheel seals - bwake - 10-16-2020,
RE: Stemco wheel seals - Rawze - 10-17-2020,
RE: Stemco wheel seals - t700 - 10-17-2020,
RE: Stemco wheel seals - bwake - 10-17-2020,
RE: Stemco wheel seals - Rawze - 10-19-2020,
RE: Stemco wheel seals - Rawze - 10-20-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.