Stemco wheel seals
10-05-2017, (Subject: Stemco wheel seals ) 
Post: #13
RE: Stemco wheel seals
Ok, thanks a lot for the input. One axle didn't have a spacer, 2 did, and the place I got the bearings from said throw them away anyway. I'll have to redo them this weekend, because they were done without the spacer. Might as well give the ProTorqs a go while I'm at it, they look interesting.
replyreply
 Thanks given by: Hammerhead


Messages In This Thread
Stemco wheel seals - dhirocz - 10-03-2017,
RE: Stemco wheel seals - Nilao - 10-03-2017,
RE: Stemco wheel seals - Rawze - 10-03-2017,
RE: Stemco wheel seals - JMBT - 10-04-2017,
RE: Stemco wheel seals - ZeroNthedark - 10-05-2017
RE: Stemco wheel seals - JMBT - 10-06-2017,
RE: Stemco wheel seals - Rawze - 10-07-2017,
RE: Stemco wheel seals - Rawze - 10-16-2020,
RE: Stemco wheel seals - bwake - 10-16-2020,
RE: Stemco wheel seals - Rawze - 10-17-2020,
RE: Stemco wheel seals - t700 - 10-17-2020,
RE: Stemco wheel seals - bwake - 10-17-2020,
RE: Stemco wheel seals - Rawze - 10-19-2020,
RE: Stemco wheel seals - Rawze - 10-20-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.