Just left the dealership....

[Waterloo]

(10-07-2017 )Jamescj212 Wrote:  Ok. Kinda confused about running a wire up my wiper blade housing?

Here is the post regarding the fire potential in the ProStar. The harness is the major issue.
http://rawze.com/forums/showthread.php?tid=1511

Here is the post regarding the Ambient Air Temp Sensor and where to place. The wire up to the windshield...
http://rawze.com/forums/showthread.php?tid=1711

I supplied the part numbers, my dealer has the parts in their normal stock.

This should get your AC working in that ProStar if the system is not contaminated or needs to be charged, rebuilt, etc.

Also, in your fuse block, right at the front is a 30 amp fuse or breaker, that is the one that controls your blower motor. Before you do anything, replace that breaker with a 30 amp normal old push in fuse and see if that does not get your AC working. These fuses and breakers will look ok, but in reality they are toast. Simple and cheap, start there.