Crankshaft Timing Sensor, Is there a trick? |
10-14-2017, (Subject: Crankshaft Timing Sensor, Is there a trick? ) Post: #1 | |||
| |||
Crankshaft Timing Sensor, Is there a trick? I'm replacing the lower Crankshaft Timing Sensor, is there a trick to getting that damn thing out? Not much room to operate down there on the ProStar. I unplugged from the harness, as well removing the 10mm bolt holding it in place. This baby is not moving at all, and is all plastic, I don't want to snap that thing off in the block. It slips in, with an o-ring to make a seal. Any thoughts or how did you tackle this sensor? | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Crankshaft Timing Sensor, Is there a trick? - Waterloo - 10-14-2017 RE: Crankshaft Timing Sensor, Is there a trick? - Wiseman - 10-14-2017, RE: Crankshaft Timing Sensor, Is there a trick? - Waterloo - 10-14-2017, RE: Crankshaft Timing Sensor, Is there a trick? - Wiseman - 10-14-2017, RE: Crankshaft Timing Sensor, Is there a trick? - Waterloo - 10-14-2017, RE: Crankshaft Timing Sensor, Is there a trick? - marek4792 - 10-14-2017, RE: Crankshaft Timing Sensor, Is there a trick? - Waterloo - 10-14-2017, RE: Crankshaft Timing Sensor, Is there a trick? - marek4792 - 10-14-2017, RE: Crankshaft Timing Sensor, Is there a trick? - Nilao - 10-15-2017, RE: Crankshaft Timing Sensor, Is there a trick? - Waterloo - 10-16-2017, RE: Crankshaft Timing Sensor, Is there a trick? - Hammerhead - 10-16-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.