| Ball joints... |
| 10-14-2017, (Subject: Ball joints... ) Post: #6 | |||
| |||
| RE: Ball joints... Tie rod ends shouldn't be a big issue. They were done by someone recently, but before I got it. However, they look to be some cheap china crap, so I'm putting OEM on it. Also doing the u joints in the steering shaft for good measure. The ball joints are the goofy one. I've done many styles of ball joints before, but none on something like this with that nut looking deal on the bottom. Makes me wonder what is different about the procedure that an engineer decided that was necessary... User's Signature: 2010 T2000, CM871, 13spd, 977k, tanker yanker Overhauled @ 927k | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Ball joints... - dhirocz - 10-13-2017, RE: Ball joints... - JMBT - 10-14-2017, RE: Ball joints... - JMBT - 10-14-2017, RE: Ball joints... - Rawze - 10-14-2017, RE: Ball joints... - JMBT - 10-14-2017, RE: Ball joints... - dhirocz - 10-14-2017 RE: Ball joints... - Nilao - 10-15-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.