Transmission cooler damaged. |
10-14-2017, (Subject: Transmission cooler damaged. ) Post: #8 | |||
| |||
RE: Transmission cooler damaged. JIC is like an industrial version of an AN. Works like an AN, but not made to such exacting tolerances meaning they are cheaper. However, not compatible with AN. I doubt the trans cooler uses barbed fitting which was why I asked. Trying to see what you are working with. User's Signature: 2010 T2000, CM871, 13spd, 977k, tanker yanker Overhauled @ 927k | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Transmission cooler damaged. - Waterloo - 10-14-2017, RE: Transmission cooler damaged. - dhirocz - 10-14-2017, RE: Transmission cooler damaged. - Waterloo - 10-14-2017, RE: Transmission cooler damaged. - Rawze - 10-14-2017, RE: Transmission cooler damaged. - Waterloo - 10-14-2017, RE: Transmission cooler damaged. - dhirocz - 10-14-2017, RE: Transmission cooler damaged. - Waterloo - 10-14-2017, RE: Transmission cooler damaged. - dhirocz - 10-14-2017 RE: Transmission cooler damaged. - Nilao - 10-14-2017, RE: Transmission cooler damaged. - Brock - 10-15-2017, RE: Transmission cooler damaged. - Waterloo - 10-15-2017, RE: Transmission cooler damaged. - Rawze - 10-15-2017, RE: Transmission cooler damaged. - Waterloo - 10-15-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.