Almost fix ended

[INTERPRO]

Good morning,

I want to thank everyone that helped me troubleshoot on my last thread. Cleaning the fuses fixed most of my problems with the engine codes.

I have 3 codes left on my (brake, cluster, and body controller, please check [jpro codes image]). I found some things while i was checking my body controller as follows. I already cleaned the corrosion on P1 and P2, but I still have those codes left.

P1. Corrosion on some plugs
P2. Corrosion on some connectors
P3. 2 connectors that looked like they belong together they were disconnected. (check images [green-green disconnected.)
P4. J2, J4, and J5 have errors on Diamond logic builder (check images [ESC J2, ESCJ4, and ESCJ5])

I have some questions on these problems
Q1. are those cables supposed to be connected or disconnected on problem P3
Q2. Is it normal to show red on P4?