Any way to know??

[JMBT]

Hammer: thanks for the feedback!! Yeah I was looking at the cummins spring compressor. I found it on line for $391 I think, then I believe they showed a special tool for seating the new seals and one for seating the injectors?? I like your idea of the pliers for removal and a deep socket for installing the seals that will save some bucks. I was also thinking of getting a small indexable pry bar like Rawze had in his 871 injector video for prying up the injectors to remove them. I have a shi#t-ton of pry bars, but none that are indexable. Trying to gather everything I need. I haven’t ever pulled injectors before so that is a bit scary, but I watched Rawzes video on the 871 injectors, and I’m thinking it should be a bit easier on the 2250 because of no injector cam. Anyway, that’s how you learn right, I have to try it sometime.
I think I will try and inspect them first, like you mentioned, with a light and mag glass. If I could just get some kind of a visual confirmation before I start pulling injectors that would be great. Any other tips or tricks you can pass along would be much appreciated!