| CM-871 Overhead... |
| 10-22-2017, (Subject: CM-871 Overhead... ) Post: #14 | |||
| |||
| RE: CM-871 Overhead... See, I knew you would find the feeler gauge set... Here is another option for the injector pre-load torque wrench https://www.amazon.com/gp/aw/d/B01FMXEWQ...SY340_QL65 I carry this one with me in the truck because it has no needles or dials to vibrate apart while along for the ride. It is just as accurate as my MAC dial type one. For the price, you can but a couple. Member 8042 has a Prostar as well, and yup my fat belly made # 5 & 6 fun as well, neither one of us is small. A mirror is definitely the way to go. Also, wash the "doghouse" of the firewall really well before doing anything with the rocker cover off. It is darn near impossible to not knock some dust off while your in there. An old towel or large rag placed over the back part of the engine, and removed only when doing those cyl's wouldn't be a bad idea. User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..." | |||
|
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.