Help with insite vgt install

[Vulcantweet]

(11-01-2017 )Rawze Wrote:  It normally only takes about 10 seconds or so.

It is fairly rare, but it can hang up on the first calibration sometimes. I have not seen one do that in a very long time (couple years) though and forget exactly how to get around it. I think you simply turn off the keys-witch, then back on and it will let you continue to the next step. I know there is some kind of dance you can do that gets you around it. Also, version 7.5 of Insite did not have this issue, nor does the later versions i think.

I’ve had issues with this insite before. After forced regen it kept on acting like it was doing something. Truck stopped making regen noises at almost exactly 45 minutes. Insite never stopped - had to shut down manually.
I was told Insite ( the commonly used version...) would only work with win 7, which is installed on an older Vaio laptop I have a much newer win 10 laptop as well. What version would you recommend I change to, and on what OS?
Hoping that fixes it - if I can remember how to “activate” it...

Thanks for your help.

Greg