Worn out cab bushings

[sbtrucking]

(03-15-2017 )Rawze Wrote:  

(03-15-2017 )Waterloo Wrote:  I watched a mechanic replace a set on a ProStar, used a large cherry picker and wrapped a strap around the cab mount and jacked it up. Used a hammer to knock the old mount out and slipped in the new one, lowered the cab and installed the bolt. Took him all of ten minutes, if that, to do a side. He made it look easy.

first of all they drop out of the bottom of the mount with 2 little bolts. There IS NO HAMMERING THEM OUT unless you are a complete idiot!. Next, you can simple just use a bottle jack or car jack and a 4x4 under the support to take the weight, no need for lifting it at all. Simply unbolt the thru-bolt for the bushing itself, then simply remove the 2 small retaining bolts in the bottom if it. It falls out in your hand without lifting anything. - Easiest cab mounts I have seen on any truck to replace.

whats the part # mine are toast to 09 prostar thanks